Answers are grounded in this paper and cite their sources.
Chalcogenide‐glass‐based ion‐selective electrodes were developed and evaluated for chloride‐ion detection using Ag X –Ag 2 S–As 2 S 3 ( X = Cl or Br) glass membranes. Six different glass compositions were synthesized by melt‐quenching and used as ion‐sensitive membranes in two electrode configurations: glass‐slice sensing (GSS) and glass‐pellet sensing. The electrochemical performance of the fabricated electrodes was investigated in terms of potentiometric response, sensitivity, limit of detection, and long‐term stability. GSS‐C#8, with nominal composition (AgBr) 0 . 5 (Ag 2 S) 0 . 25 (As 2 S 3 ) 0 . 25 , gave the best overall performance among the tested electrodes. Its response slope magnitude was 13.8 ± 0.5 mV per decade initially and 11.5 ± 0.8 mV per decade after 30 days of storage in 0.1 mol L −1 NaCl. The corresponding detection limits reported for the calibration curves were approximately 1.9 × 10 −3 and 1.6 × 10 −4 mol L −1 , respectively. Most pellet‐based electrodes showed weaker or less stable responses. These results establish a dependence on composition and fabrication route, although the origin of the strongly sub‐Nernstian response remains unresolved. Conditioning‐induced surface modification, potentially involving silver‐halide phases, is a possible explanation requiring direct characterization. The selected GSS‐C#8 electrode was incorporated into an Arduino‐controlled flow‐cell prototype, which gave a chloride‐dependent potential with a fitted slope magnitude of 7.0 ± 0.3 mV per decade. The study demonstrates automated measurement with chalcogenide‐derived membranes and identifies surface chemistry, calibration stability, and selectivity as requirements for further development.
No takes yet. Share an insight, caveat, or question.
Moreno et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: