Answers are grounded in this paper and cite their sources.
Time-varying surrounding-rock temperatures in mine roadways can induce unsteady heat transfer and temperature fluctuations, which reduce the stability of underground ventilation cooling. To clarify the regulating effect of an insulating shotcrete layer on this process, this study investigated the transient thermal response of a ventilated mine roadway under time-varying thermal boundary conditions. A laboratory-scale wind tunnel was used to compare the temperature responses under controlled thermal boundary conditions, with and without an insulating shotcrete layer. The study integrated theoretical heat-transfer analysis, laboratory measurements, and three-dimensional conjugate heat-transfer simulations, with numerical predictions evaluated against the measured stable periodic temperature responses. The results showed that the insulating shotcrete layer markedly weakened the transient wall-temperature response, reducing the wall-temperature peak by 6.1–10.8 °C and compressing the wall-temperature fluctuation amplitude to 0.2–0.8 °C. At an airflow velocity of 2 m s −1 , the cycle-averaged wall-to-air heat flux density decreased from 78.3 to 9.6 W m −2 , representing a reduction of 87.74%. However, the centreline airflow temperature increased by approximately 0.5–1.3 °C across the investigated conditions, indicating that reduced wall heat transfer does not necessarily imply an overall improvement in airflow thermal conditions. These findings provide a basis for coordinated insulation–ventilation optimisation and thermal environment control in mine roadways.
No takes yet. Share an insight, caveat, or question.
Fan et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: