Key points are not available for this paper at this time.
In the field of wearable robotics, there has been increased interest in the creation of soft wearable robots to provide assistance and rehabilitation for those with physical impairments. Compared to traditional robots, these devices have the potential to be fully portable and lightweight, a flexibility that may allow for increased utilization time as well as enable use outside of a clinical environment. In this letter, we present a textile-based multi-joint soft wearable robot to assist the upper limb, in particular shoulder elevation and elbow extension. Before developing a portable fluidic supply system, we leverage an off-board actuation system for power and control, with the worn components weighting less than half kilogram. We showed that this robot can be mechanically transparent when powered off, not restricting users from performing movements associated with activities of daily living. Three IMUs were placed on the torso, upper arm and forearm to measure the shoulder and elbow kinematics. We found an average RMSE of ~ 5 degrees when compared to an optical motion capture system. We implemented dynamic Gravity Compensation (GC) and Joint Trajectory Tracking (JTT) controllers that actively modulated actuator pressure in response to IMU readings. The controller performances were evaluated in a study with eight healthy individuals. Using the GC controller, subject shoulder muscle activity decreased with increasing magnitude of assistance and for the JTT controller, we obtained low tracking errors (mean ~ 6 degrees RMSE). Future work will evaluate the potential of the robot to assist with activities in post-stroke rehabilitation.
Proietti et al. (Mon,) studied this question.