Answers are grounded in this paper and cite their sources.
Research on geomodifiers reveals their varying tribological properties in friction units, suggesting improvements in powder selection.
X-ray phase, chemical and granulometric characteristics of pioneer powders of geomodifiers of friction are investigated in Nanocenter of GOSNITI and in other organizations where the situation with them is not unambiguous. Powders vary considerably, are not stable and at the fi rst stages of their application there was an emergency wear of ice. On these three tribological characteristics of the considered varieties of serpentine: microseismicity sheet — antigorite; chrysotile asbestos; finegrained — izardite. It is difficult to distinguish them in their pure form and there is a problem of stability of composition of geomodifiers. The presence of solid impurities in tribopressed leads to abrasive wear of friction units. X-ray phase analysis of the pioneer geomodifi ers on XRD 6000 diff ractometer showed, for example, that the antigorite claimed to be the main component of the tribo-compositions was detected only as an admixture only in the powder of Ph. D. Filkov. Especially eff ective Lizardite 1T were only found in 6 powders out of 22. All powders — mixtures of silicates, oxides up to 10 metal, complex, in addition to the composition of "RVD" and is quite different. The reliability of such studies is confirmed by a good coincidence of different diffractograms of the same powders. Dozens of other geomodificators characteristics are also mixed. Their powders also contain fractions — submicron and with a particle size of 1–110 microns. For an optimal fraction of 1–20 μm, the powders are dispersed in mills and by ultrasound. Here it is necessary to establish a balance between the submicron fraction and micron units in terms of time and intensity of treatments. The next unsolved problem is the activation of powder particles in mills and in ultrasound. Overall, the problems on the creation of industrial serpentine triboactive include: Selection of minerals and their primary treatment; Choice of technology for grinding, separation and enrichment of minerals; Selection of activators and inhibitors for the main powder; Selection of powder storage modes to eliminate unnecessary phase and physico-chemical; transformations of serpentines; The choice of methods of truboobrabotka for different Friction; Selection of objects for processing and screening is not promising, emergency; The development of a range of tribological serpentine powders; Organization of management for their implementation. Some of these problems were solved in the Nanocenter of GOSNITI in the creation of industrial products of JSC "mine Saranovskaya" serpentine composition "TriboGOSNITI". He is, in comparative tests with other triboactive on tribometer TRB-S-DE proved to be one of the best serpentine and brought tribological properties of motor oil M-10G2K to higher tribosystem motor oil company Mobil. At the same time the coefficient of friction during the test of the steel tribopary finger-disk in the mode of step loading to a pressure of 218 MPa and a sliding speed of 100 cm/s remained at the level of 0.04.
No takes yet. Share an insight, caveat, or question.
Дунаев et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: