Answers are grounded in this paper and cite their sources.
Experimental analysis shows single-dimple initiation sites in cylindrical shells under compression, suggesting new methods for understanding buckling.
Recent studies show that cylindrical shells under axial compression buckle into a fully localized, single-dimple mode, which then further evolves into a periodic post-buckling shape. Predicting where the single dimple initiates and for what reason remains an open challenge. This paper analyses the experimental pre-buckling responses of compressed cylindrical shells to uncover the mechanics that govern the dimple initiation site. Both three-dimensional-printed and metallic shells are studied, and their full-field responses are acquired through a multi-three-dimensional digital image correlation set-up. First, the classical Fourier series approach is used to decompose the pre-buckling deformation field of a three-dimensional-printed shell. While the most dominant mode revealed in this decomposition accurately predicts the circumferential wavenumber of the post-buckling periodic mode shape, it fails to isolate the single dimple. Consequently, we propose a new method based on the full-field bending energy distributions in the pre-buckling regime to pinpoint the single-dimple initiation site. The methodology is applied to multiple shells and successfully reveals the presence of a developing localized mode in the pre-buckling regime at approximately 60% of the critical buckling load. Thus, the proposed methodology will help identify suitable locations for lateral probing to estimate the buckling load of cylindrical shells.
No takes yet. Share an insight, caveat, or question.
Ravulapalli et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: