As a form of non-destructive testing, eddy current testing is widely used for detecting surface micro-damage on metal components in sectors such as aerospace. Conventional frequency-domain analysis techniques often fail to effectively extract defect-related features from non-stationary eddy current signals. This paper proposes an ECT system based on the Discrete Wavelet Transform to address this limitation. In hardware design, the system employs a DDS to generate a 1 MHz excitation signal for the probe. High-precision acquisition of defect response signals is achieved using an IQ demodulator and a 24-bit ADC. For signal processing, the Haar wavelet is applied for single-level decomposition. This method successfully isolates the defect response signal within the high-frequency detail coefficients. Experimental results demonstrate that for a metal surface notch with a depth of 1 mm, the system significantly improves the SNR, resulting in a ΔSNR improvement of 3.64 dB, which is 0.36 dB higher than that achieved using time-domain processing.
Xia et al. (Fri,) studied this question.