Advancing Multi-Touch Sensing: Integrating FTIR and ToF Technologies for Precise and Large-Scale Touch Interfaces

Building upon recent advances in tactile sensing platforms such as OptoSkin, this research introduces an enhanced multi-touch sensor design that integrates Frustrated Total Internal Reflection (FTIR) technology with embedded Time-of-Flight (ToF) sensors for superior performance. Utilizing a 2 mm thick poly(methyl methacrylate) (PMMA) acrylic light guide with an area of 200 × 300 mm2, the system employs the AMS TMF8828 ToF sensor both as the illumination source and the receiver. The selected PMMA, with a refractive index of 1.49, achieves an optical field of view (FoV) of approximately 32 degrees for the ToF receiver and enables signal propagation with minimal optical loss. Remarkably, a single ToF sensor can cover an active area of 195 cm2 with a linear resolution of approximately 1 cm and an angular resolution of up to 3.5 degrees. This configuration demonstrates not only the feasibility of direct FTIR–ToF integration without the need for external cameras or electrode arrays but also highlights the potential for precise, scalable, and cost-effective multi-touch sensing over large surfaces. The proposed system offers robust performance even under direct sunlight conditions, setting a new benchmark for advanced tactile interface development across consumer electronics, industrial control, and robotic skin applications.