Answers are grounded in this paper and cite their sources.
Experimental study reveals how spindle imbalance affects machining accuracy and surface roughness.
The influence of the parameters of the elastic system of the finishing and boring machine on static deformations, oscillations and accuracy of fine boring is studied. Based on experimental studies of the effect of spindle imbalance with a boring rod on machining accuracy, a method was developed for calculating deviations from roundness caused by the action of cutting forces and centrifugal forces on elastic systems with anisotropic rigidity. Static errors and deformation features in the closed dynamic system of the machine were also studied. The total deviation from roundness caused by elastic deformations is calculated as the sum of static and dynamic components. The mean values of the imbalance me, the mean square deviations of χ and the deviation of the maximum values of the imbalance memax to the permissible [me] are given. The effect of imbalance on the roughness of the treated surface has been established. Since the increase in deviations from roundness is caused by the ovalization of the hole, the reason for the violation of the accuracy of the cross-sectional shape with an increase in the transverse force is the anisotropy of the radial rigidity of the elastic system of the machine. Testing units of the same standard size under the same conditions, the ovalization of the holes does not remain constant, therefore, the anisotropy of elastic properties is associated with the individual quality of the spindle assembly, namely, with the accuracy of individual parts of the unit and their assembly.
No takes yet. Share an insight, caveat, or question.
Orgian et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: