Answers are grounded in this paper and cite their sources.
Case study shows improved stability values using hot in-place asphalt recycling, indicating benefits over conventional methods.
materials, such as Reclaimed Asphalt Pavement (RAP), are utilized as components in asphalt mixtures. The RAP material employed in this study was obtained from the peeling of an old pavement on Zayed Bin Sultan Road from Al Bawadi Mall to Military Roundabout Al Ain, Abu Dhabi, United Arab Emirates (UAE). After its removal, RAP underwent the Hot In-Place Recycling (HIR) method. The findings were then compared with those of the conventional method. This study used 12% RAP in the Recycled Asphaltic Concrete-Wearing Course (RAC-WC) mixture. A total of 3 AC-WC mixtures were tested, with bitumen content percentages of 3.7%, 3.9%, and 4.1%. The Marshall Stability test results showed that the stability values followed a pattern involving four separate phases: Initial load adjustment, linear elastic deformation, nonlinear inelastic deformation, and post-peak stress region. The highest Marshall Stability value, 16550 N, was achieved for the mix with 3.9% bitumen content. The stability and elasticity values using HIR were higher than those obtained by deploying the conventional method.
No takes yet. Share an insight, caveat, or question.
Saeed et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: