September 11, 2025Journal of Elastomers & Plastics

Assessment of the influence of abrasive water jet drilling parameters on glass fiber-reinforced polymer composites

View Full Paper

Ask AI

Bookmark

Water pressure was found to be the most influential parameter on roundness error and kerf taper, greatly affecting the drilling quality.
Using a Taguchi L16 orthogonal array, the study measured the impact of parameters like stand-off distance and feed rate on drilling outcomes.
Artificial Neural Network (ANN) modeling was employed to predict results, achieving high accuracy with minimal error in the estimates.
Optimal drilling conditions were established, achieving a roundness error of 0.709 mm and a kerf taper of 0.420° based on the most effective parameters.

Discussion

No takes yet. Share an insight, caveat, or question.

Implication

Experimental analysis found that water pressure significantly impacts kerf taper and roundness error in GFRP composites, indicating optimal conditions for drilling.

Cite This Study

Karataş et al. (2025) studied this question.

synapsesocial.com/papers/68c2a9cb04ab598fffb89f6b https://doi.org/10.1177/00952443251377976

View Full Paper

Ask AI

Bookmark

Implication

Experimental analysis found that water pressure significantly impacts kerf taper and roundness error in GFRP composites, indicating optimal conditions for drilling.

Assessment of the influence of abrasive water jet drilling parameters on glass fiber-reinforced polymer composites

Key Points

Discussion

Implication

Cite This Study

Assessment of the influence of abrasive water jet drilling parameters on glass fiber-reinforced polymer composites

Key Points

Discussion

Implication

Cite This Study

Also Consider

Also Consider