Synapse
⌘+K
Synapse
PulseExploreClubsResearchersJournals
Instagram
HomeClubsExplore
September 18, 2025The International Journal of Prosthodontics

Impact of Different Universal Adhesives on Shear Bond Strength in Composite Repairs to Different CAD/CAM Silicate Ceramics – An In Vitro Study

View Full Paper
Ask AI
Bookmark
Share

Authors

MJMalin JansonUniversity of CologneNGNicolai GeebelenInstitute of Thermal PhysicsCSChristoph Matthias SchoppmeierUniversity of Cologne

Discussion

Loading...

Member takes

Implication

In vitro analysis reveals the influence of various universal adhesives on shear bond strength in silicate ceramics, indicating significant differences across adhesive types.

Key Points

  • IEC showed the highest shear bond strength with CUB at 27.09 MPa, while IXC with IBU was the lowest at 2.64 MPa.
  • Significant shear bond strength variations were observed among different CAD/CAM ceramics and universal adhesives, affecting repair strategies.
  • Analysis used the Kruskal-Wallis test, revealing that adhesive type and ceramic microstructure significantly influence bonding performance.
  • Cohesive failures were predominant in IEC ceramics, while IXC and CTS exhibited more adhesive failures, highlighting the importance of adhesive selection.

Cite This Study

Janson et al. (2025) studied this question.

synapsesocial.com/papers/68d463e231b076d99fa630f8https://doi.org/10.11607/ijp.9507
View Full Paper
Ask AI
Bookmark
Share

Also Consider

Synapse has enriched 5 closely related papers on similar clinical questions. Consider them for comparative context:

  1. 1How the repair bonding strength of hybrid ceramic CAD/CAM blocks is influenced by the use of surface treatments and universal adhesives2024 · 13 citations
  2. 2The Effect of Different Chemical Surface Treatments on the Bond Strength of Resin-Matrix Ceramic Repaired with Resin Composite2024 · 8 citations
  3. 3Effect of surface conditioning protocols on the repair bond strength of resin composite to CAD/CAM blocks: Bioactive‐glass, silica‐coated alumina, or aluminum oxide?2025
  4. 4Effect of Surface Treatments and Bonding Agents on Microshear Bond Strength of Zirconia-Reinforced Lithium Silicate and Conventional Glass-Ceramics: Silane Versus Universal Adhesive2026
  5. 5Assessment of Adhesive Protocols on the Repair Bond Strength of Vita Enamic Polymer-Infiltrated Ceramic Network Using Functional Monomer-Containing Universal Adhesives2026