Answers are grounded in this paper and cite their sources.
This analysis shows reduced pressure fluctuations in pumped storage systems during ball valve closure, suggesting operational improvements.
The operational stability of pumped storage systems is paid increasing attention. When a pumped storage unit experiences load rejection and the guide vanes refuse to move, the ball valve must be closed in time to control pressure fluctuations and structural vibrations. This study analyzed the pressure fluctuation characteristics of the penstock and pump turbine in a real pumped storage power station during the ball valve closure process to determine whether the closure of the ball valve is beneficial for reducing pressure fluctuations. A full fluid domain model of a pumped storage system with a three-dimensional penstock was established. The SST k-ω turbulence model was employed to conduct transient numerical simulation and analyze pressure fluctuation phenomena under turbine mode. The study compared and analyzed the pressure fluctuation characteristics in the unit and the penstock under two conditions: linear closure of the ball valve and no closure of the ball valve. The results show that linear closure of the ball valve results in a reduction of the maximum runner speed achieved by the pump turbine by approximately 2.5% and results in a lower pressure coefficient in the flow path behind the ball valve. During ball valve closure, numerical simulation results show that water hammer waves propagate in the pipeline. This study provides methodological references and data support for optimizing the ball valve closure rules during unit load rejection with stuck guide vanes in pumped storage systems.
No takes yet. Share an insight, caveat, or question.
Wu et al. (2025) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: