Answers are grounded in this paper and cite their sources.
Simulation reveals a novel gas-liquid separator's ability to achieve 90% separation efficiency, indicating effective phase separation dynamics.
A new phase separation technique is studied using Computational Fluid Dynamics CFD. It is based on swirling gas/liquid flow generated by a swirl cage. Then, a hollow bluff body with a tapered front side was placed into a pipe to collect the water annulus within the annular space and the gaseous phases inside the internal passage. A mesh of approximately 20 million cells was generated. The flow was assumed turbulent, transient, three-dimensional and incompressible. The SST k-ω and full-Eulerian models were used. The water flow rate was equal to 40 l/min and 150 l/min for which the air flow rate varied to reach proportions of 5 and 30 % by volume. For low flow rates, the gas core is sucked inside the internal passage with some water. Increasing, the air flow rate, at the inlet, yields a larger air core reducing the amount of entrained water yielding a better separation. Air could pass through the annular space occasionally under the effect of air core instabilities. For the preliminary design of the separator, under the working conditions considered, the separation efficiency reached 90 % and above. The bluff body should be redesigned according to the upstream air core characteristics.
No takes yet. Share an insight, caveat, or question.
Kharoua et al. (2025) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: