Answers are grounded in this paper and cite their sources.
Experimental separator improves separation efficiency for gas/liquid mixtures, suggesting optimal swirl configuration.
In steam distribution systems, a separator is considered to be an essential component. Tests have been carried out on a number of commercially available separators and these were only found to be effective for gas inlet velocities up to a critical velocity, typically 24 m/s, beyond which their efficiency collapses. An experimental separator has been designed in which the major geometries can be varied and which contains a swirl generator with a hub of diameter 75 mm and initially with 8 blades. The body of the experimental separator has been manufactured from 150 mm dia plexiglass tube. The inlet and outlet pipe diameter and the internal geometry have been systematically varied. Following the geometric optimisation, the results show that at low velocities the separation efficiency is about 93%, but that this can fall to about 85% over a narrow velocity range before rising again to about 95% at high velocities. This is believed to be due to the operation of the separator changing from that of a simple inertial separator to that of a true centrifugal separator. In further tests it was found that the pressure drop across the separator is most affected by the number of swirl vanes; when the number of vanes is eight the Euler number is as high as 370 (based on the characteristic velocity in the body of the separator) and can be greatly reduced to 20 when the vane number is halved.
No takes yet. Share an insight, caveat, or question.
Gardner et al. (1995) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: