Improving extraction of forest canopy height through reprocessing ICESat-2 ATLAS and GEDI data in sparsely forested plain regions

Forest canopy height (FCH) is one of the most important variables for carbon stock estimation. While many studies have focused on extracting FCH from spaceborne LiDAR in regions with spatially continuous and large patch sizes of forested lands, limited research has addressed the challenges of FCH extraction in plain regions with sparse and fragmented forest distributions. In this study, we proposed innovative processing approaches to extract FCH from ICESat-2 photons and GEDI footprints in the plain regions of Anhui Province, China. Specifically, we proposed a sectional photon denoising method for processing ICESat-2 data and a geolocation error correction method for processing GEDI data. Airborne LiDAR data were used to validate the extracted FCH products across typical plain regions. The results demonstrated the effectiveness of the proposed methods in improving FCH extraction accuracy. Evaluation indicated that the directly extracted FCH products from ATL08 and GEDI L2A had Pearson's correlation coefficients (r) of 0.6 and 0.93, respectively. After processing with the proposed methods, the 2019 FCH products from ICESat-2 exhibited r of 0.82 and relative root mean square error (rRMSE) of 31.11% based on 3,217 ICESat-2 segments, and the products from GEDI showed r of 0.96 and rRMSE of 18.35% based on 4,862 GEDI footprints. Further application of these methods to extract FCH products from GEDI and ICESat-2 for the years 2020, 2021, and 2022 indicated their promise for addressing sparse vegetation coverage in plain regions.