Key points are not available for this paper at this time.
We have investigated the influence of 101 mass ppm hydrogen content on the room temperature deformation structure and mechanical behavior of an austenitic Fe30Mn6.5Al0.3C (wt.%) low-density steel by several electron microscopy techniques, such as electron channeling contrast imaging (ECCI), electron backscatter diffraction (EBSD), and scanning transmission electron microscopy (STEM). The steel exhibits a high hydrogen embrittlement resistance associated with a moderated increase in strength (yield stress increase of 10%) and ductility (increase in the elongation to fracture of ∼ 8%). Analysis of the deformation structure reveals that hydrogen influences the deformation behavior by promoting deformation mechanisms associated with inhomogeneous plasticity (hydrogen-enhanced deformation banding (HEDB)) and strain localization (hydrogen-enhanced microbanding (HEMB)). These deformation mechanisms are ascribed to hydrogen-induced effects on dislocation plasticity, resulting in macroscopic kink bands, sub-micron localized strain gradients, and localized shear at cell blocks. We find that HEMB plays a relevant role in the deformation behavior of sub-micron localized strain gradients by promoting plastic relaxation and the enhanced storage of geometrically necessary dislocations within them. These effects mitigate the activation of damage mechanisms and enhance the strain-hardening capacity, contributing to the high HE resistance of the steel, comparable to that of high HE-resistant fcc alloys and steels.
Gutiérrez‐Urrutia et al. (Mon,) studied this question.