Broad-area lasers (BA) are practical for producing high output power. However, under a high current operation, high-order modes are easily excited, resulting in the broadened linewidth. Here, based on mode engineering of double-side transverse photonic crystals (TPCs) combined with a longitudinal high-order surface grating, a narrow-linewidth electrically-pumped broad-area laser with high power emission only using I-line lithography is demonstrated. By matching the high-order modes of the wide main waveguide with TPC bands, the effective volume of the high-order modes is expanded, while the fundamental mode remains unchanged. Then, single-lateral mode operation is achieved by selective pumping only for the main waveguide due to the significant distinction in modal gain between the fundamental mode and the high-order modes. In addition, a 27-order grating is constructed above the main waveguide to keep the laser operating in single-longitudinal mode. In the experiment, the device shows an output power of 115 mW, a lasing wavelength of 1552.94 nm with a side-mode suppression ratio (SMSR) of 59.26 dB, a narrow linewidth of 443 kHz, and a relative intensity noise (RIN) < -135 dB/Hz at 600 mA, thus has the potential to meet the needs in fields such as coherent optical communication and LiDAR.
No takes yet. Share an insight, caveat, or question.
Dai et al. (2024) studied this question.
Synapse has enriched 5 closely related papers on similar clinical questions. Consider them for comparative context: