Answers are grounded in this paper and cite their sources.
The mechanism of iron removal from Al-Si alloys by dopants was studied with the aim of improving the mechanical and physical properties of the alloys. The mechanism of iron removal from the Al-Si alloys was established with the results obtained from the study. The as-cast Al-Si alloys were analysed for iron content using Atomic Absorption Spectrometer technique. The properties tested were the mechanical (ultimate tensile strength, percentage elongation, microhardness, impact strength and bend test) and physical (electron conductivity and resistivity) properties. Tensile strength was determined using the TUE-C- 100 Model universal tensile machine, impact strength was determined using Samuel Denison, Model LS10 2DE impact testing machine, the bend test by Control Wizard testing machine, Basic Model, microhardness was determined using the Micromet 200 Series Rockwell testing machine Model 60044 and electron conductivity was determined using DDS-307 conductivity meter Model Fs240AA.. The results obtained from the study showed that the ratio of iron to dopant equals to 1:1 gave a decrease of iron from 1.7 to 0.44%. It was found that the formation of iron- rich phases such as Al15(FeMn)3Si2 and Al15(FeCo)4Si2 in preference to AlFeSi phases resulted in iron removal from Al-Si alloys. The results also showed a correlation between iron removal and mechanical and physical properties.
No takes yet. Share an insight, caveat, or question.
Nwankwo et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: