Answers are grounded in this paper and cite their sources.
In the context of clean energy and green chemical production, the two-phase flow electrochemical carbon dioxide reduction reaction (CO 2 RR) to formate has gained considerable interest, and efforts are being made to scale up the process [1] . With respect to electrode design, unlike in the simpler single-phase system, which is limited by the solubility of CO 2 in the electrolyte and by the mass transport of the dissolved CO 2 gas from the bulk of the electrolyte to the cathode surface [2] , mixed gas/liquid flow in the trickle bed reactor [3] or segregated flow in the gas diffusion electrode (GDE) [4] reactor provide more efficient gas delivery at the catalyst/electrolyte interface. This enhanced the overall mass transfer coefficient and enabled higher reaction rates per unit geometric area of the electrodes, providing that the electrocatalyst layer's intrinsic activity and selectivity are established. Due to the limitation in retaining the effective electroactive bed thickness in the trickle bed reactor [3] , GDEs are preferred for high current density operations (typically above 100 mA cm -2 ). Despite the continuous gas transport mechanism, the reported performance in the GDE-based system lies around 200 mA cm -2 , with occasional reports above 200 mA cm -2 but on a tiny electrode area (typically 1 cm 2 or below) [5] . The flooding of the GDE porous structure is believed to be the prime cause that limits electrode durability at high current density. Here, we present the optimization of the two-phase flow dynamics and the GDE (with 20 cm 2 geometric area) operating conditions to enable high current density operation up to 500 mA cm -2 using a tin-based catalyst layer and scalable reactor design. The performance was compared with other catalytic materials that were intrinsically active for CO 2 RR to formate. References [1] M.F. Philips, G.M.Gruter, M.T.M. Koper and K.J.P. Schouten, ACS Sustainable Chem. Eng., 2020, 8(41), 15430-15444. [2] N. Gupta, M. Gattrell and B. Macdougall, J. Appl. Electrochem., 2006, 36(2), 161-172. [3] I. Hodgson and C. Oloman, Chem. Eng. Sci., 1999. 54(23): p. 5777-5786. [4] S. Hernandez-Aldave and E. Andreoli, Catalysts, 2020, 10(6), 713 [5] S. Sen, S. M. Brown, M. Leonard and F.R. Brushett, J. Appl. Electrochem.,2019, 49, 917–928
No takes yet. Share an insight, caveat, or question.
Bashir et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: