Answers are grounded in this paper and cite their sources.
When coupled with renewables, the two-electron oxygen reduction reaction(O 2 RR) could be a valuable process to generate hydrogen peroxide (H 2 O 2 ), a versatile and environmentally friendly oxidant [1] . While the electrocatalyst's nature determines the catalytic activity and selectivity (2e - vs. 4e - reduction), the O 2 gas mass transport, electrolyte type (e.g., alkaline, neutral, or acidic) and its flow rate, and the electrode configuration (e.g., trickle-bed or gas diffusion (GDE) electrode) are also essential factors for scale-up [2-4] . Typically, operational current densities for O 2 RR are limited to less than 100 mA cm -2 , which is inadequate for industrial applications. The porous gas diffusion electrode (GDE) assembly provides continuous O 2 gas delivery at the catalyst/electrolyte interface by overcoming O 2 mass transport limitations encountered in trickle-bed or dissolved gas (single-phase) configurations. While the GDE could enable the operation under industrially relevant current densities (i.e., > 100 mA cm -2 ), for two-phase flow processes, flooding imposes severe challenges in the GDE scale-up and the durability of the process. Here, we present that a microporous carbon-coated gas diffusion electrode could enable very high current density (> 500 mA cm -2 ) synthesis of alkaline peroxide in a flow reactor with more than 90% faradaic efficiency. The microporous carbon layer provides dual functionality, namely the catalytically active sites for the reaction and controlling the GDE flooding. In addition to the electrode design, the two-phase fluid flow dynamics and electrolyzer operation conditions are significant factors for long-term stability. Although the fluid flow effect on the trickle bed type electrolyzer has been studied [3] , no study exists on the systematic investigation of the two-phase mass transfer effect in the GDE-based electrolyzer for peroxide generation with a catholyte layer. The experimental findings and mass transfer modeling highlight further improvements concerning the process scale-up. References [1] N. Wang, S. Ma, P.Zuo, J. Duan and B. Hou, Adv. Sci., 2021, 8(15), e2100076-e2100076 [2] E. L. Gyenge and C. W. Oloman, J. Electrochem. Soc., 2005, 152(3), D42-D53 [3] I. Hodgson and C. Oloman, Chem. Eng. Sci., 1999, 54(23), 5777-5786 [4] Q. Zhang, M. Zhou, G. Ren, Y. Li and X. Du, Nat. Commun., 2020, 11(1), 1731
No takes yet. Share an insight, caveat, or question.
Bashir et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: