Answers are grounded in this paper and cite their sources.
Human bone is a composite material of hydroxyapatite (HA) and collagen. HA (Ca10(PO4)6(OH)2) is a biomaterial with the calcium to phosphorus ratio being similar to the natural bone composition. In this study, composite materials were prepared by using poly(lactic acid) (PLA) as a polymer matrix, maleic anhydride (MAH) as a compatibilizer, and natural HA extracted from cow bone (BHA) as a suitable mechanical support filler with positive surface properties. Composites with varying HA (10-30 wt. %), PLA, and with or without MAH (0.5–8 wt. %) were prepared by a thermal decomposition method at 900 ℃. In comparison to commercial HA (CHA), the effect of the PLA and MAH contribution on morphological, thermal, and mechanical properties of BHA were analyzed by X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, thermogravimetric analysis (TGA), scanning electron microscopy (SEM) and tensile strength measurements. As per the results, the HA30/PLA/4MAH composite with 30 wt. % HA, 66 wt. % PLA and 4 wt. % MAH offer the maximum mean tensile strength of 307.71 MPa. The overall results confirm the contribution of MAH compatibilizer in HA/PLA/MAH composite materials for bone tissue engineering from a mechanical point of view.
No takes yet. Share an insight, caveat, or question.
Keerthana et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: