Answers are grounded in this paper and cite their sources.
Conditions for the development of cavitation are studied using the effect of light emission from a liquid during the collapse of cavitation bubbles. The results of studying cavitation in technical fluids by recording hydro- and sonoluminescence are presented. Conditions for the occurrence of hydro- and sonoluminescence were analyzed in relation to the geometry of a narrow channel; a high-speed video camera and a photomultiplier were used for recording. Universal threshold values for the strain rate of hydroluminescence in the range of 10 5 – 10 6 sec –1 have been obtained, and a methodology has been developed for recording hydro- and sonoluminescence in narrow channels to study the stages of the cavitation development. The proposed experimental setup contained two high-pressure circuits, i.e., a pressure circuit and a measuring circuit. In the pressure circuit, hydraulic oil pressure was created using a gear pump. By means of a hydraulic cylinder and a movable piston, it was transmitted to the liquid in the measuring circuit, which was then passed under pressure through a narrow channel. The proposed geometry of a narrow channel provided separation of the phenomena of hydroluminescence in a narrow channel and sonoluminescence with subsequent cavitation when the liquid exits into the diffuser as a result of a pressure drop. The design of the setup and methodology made it possible to study cavitation effects in a wide range of technical fluids, including those that are aggressive to high-pressure pump materials. The results obtained can be used to improve the means of comprehensive diagnostics of lubricated friction units proceeding from the parameters of wear products in the oil, methods for suppressing the acoustic effects of cavitation, etc.
No takes yet. Share an insight, caveat, or question.
Efremov et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: