Answers are grounded in this paper and cite their sources.
Hydrogen-related damage to boiler tubes remains one of the most challenging to diagnose degradation modes for carbon and low-alloy steels. The objective of this study was to investigate the degradation of grade 20 boiler evaporator tube steel after prolonged operation in a hydrogen-containing steam-water environment. The hydrogen concentration at the tube rupture edge was found to be 7.5 ppm (0.5 ppm on the side of the tube opposite the failure). Anomalous concentrations of carbon, manganese, and silicon (up to 2.60, 2.01, and 1.73%, respectively) were recorded in the surface layer near the inner surface. These concentrations are associated with grain-boundary redistribution of carbon, segregation of manganese and silicon, and the intercrystalline nature of the failure. The concentration profiles of hydrogen and other elements demonstrate a bidirectional damage gradient: from the inner surface deep into the wall and from the tube rupture edge in the circumferential direction of the tube. Signs of graphitization and the formation of elongated graphite were detected in a boiler tube operating at 350°C, suggesting that the process under study is hydrogen- and stress-accelerated graphitization. The volume fraction of the high-carbon phase forming in the region of degraded pearlite grains reaches 40%. A degradation mechanism is proposed, driven by the cumulative effects of hydrogen, stress, temperature, and a steam-water environment. The results obtained can be used to improve diagnostic methods for hydrogen-induced degradation of boiler tubes.
No takes yet. Share an insight, caveat, or question.
A. V. Nechaeva (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: