Session 13. Oral Presentation for: Emissions reduction in LNG production facilities through emerging post-combustion carbon capture and storage technologies

Presented on Wednesday 22 May: Session 13 The liquefied natural gas (LNG) sector relies extensively on gas turbines for on-site power generation and to drive refrigeration compressors. They provide an efficient and reliable energy source for LNG operations in remote locations. With upcoming changes to the Safeguard Mechanism in Australia, there is an increased focus on Scope 1 emissions, so management and targeted reduction are a priority to reduce liabilities. Despite technology advancements, gas turbines remain one of the largest sources of carbon dioxide (CO2) emissions in LNG production facilities. Also, in Australia, many facilities are not grid-connected, meaning that displacement of Scope 1 emissions through renewable electricity sourcing is a challenge. To develop deeper cuts in Scope 1 emissions, one solution is to deploy post-combustion carbon capture and storage (CCS) on existing gas turbines, with the potential to reduce associated emissions by over 90%. Globally, a number of LNG facilities are already deploying CCS to permanently store reservoir CO2 from the LNG processing trains. Several Australian LNG facilities are located in close proximity to potential CO2 storage reservoirs, meaning that a coordinated approach to both reservoir and post-combustion CO2 should be considered when sizing pipelines, shipping systems and storage wells to optimise and leverage the required investment. This paper outlines the technological, economic and policy aspects of integrating both reservoir post-combustion CCS on LNG facilities, including barriers and opportunities for deployment. It will discuss new developments and enablers for CCS to be more widely deployed at LNG production sites. To access the Oral Presentation click the link on the right. To read the full paper click here