Answers are grounded in this paper and cite their sources.
In order to meet the overall performance of high temperature resistant and transmitted materials for electromagnetic windows of hypersonic aircraft. In this study, Si 3 N 4f /SiO 2 ceramic matrix composites were prepared by sol-gel process. After 5 process cycles, the materials were prepared with the best comprehensive performance, with a density of 1.79 g/cm 3 , a bending strength of 149 MPa, a tensile strength of 82.1 MPa, a dielectric constant of 3.52, and a tangent of the dielectric loss of 0.004. The effects of Al 2 O 3 and LaPO 4 interface coatings on the mechanical properties of composites were studied. At room temperature, the interface coating has little effect on the bending properties of the material, and the bending strength of the Al 2 O 3 interface coating composite at 1200°C remains basically unchanged. Compared with the sample without interface coating, the strength retention rate is increased by about 16%. LaPO 4 coating had no obvious influence on the bending property of the material at 1200°C.
No takes yet. Share an insight, caveat, or question.
Zhang et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: