Partial Oscillation Flow Control on Airfoil at Low Reynolds Numbers

Among the critical factors contributing to the decline in the aerodynamic performance of near-space aircraft under low Reynolds number conditions, a significant one lies in the occurrence of laminar separation bubbles forming on the wings. Within the scope of this investigation, the primary research methodology adopted involves utilizing an unsteady numerical simulation technique rooted in a spring-smoothed dynamic grid system. This study meticulously examines the aerodynamic attributes and flow patterns exhibited by an airfoil undergoing partial oscillation, thereby elucidating the underlying mechanisms through which such oscillations lead to enhanced lift and diminished drag forces. The outcomes of this research reveal that the imposition of partial oscillation engenders a noteworthy augmentation of 4.9% in the lift coefficient of the airfoil, concurrent with a substantial diminution of 15.3% in its drag coefficient when juxtaposed against the non-deforming counterpart. The oscillation frequency exerts a profound influence on both the onset location of transition and the extent of the laminar separation bubble’s development. As the oscillation frequency escalates, it follows an initial ascending trend in the lift coefficient of the airfoil, followed by a subsequent decline, whereas the drag coefficient exhibits an initial decrement prior to a rising tendency, thus indicating the existence of an optimal frequency point where the airfoil achieves its most favorable aerodynamic characteristics. It is observed that the flow control effects are optimally pronounced when the region subjected to partial oscillation is proximate to the airfoil’s leading edge or situated precisely at the centroid of the laminar separation bubble.