Influence of Non-Ionic Surfactant and Silver on the Photocatalytic Activity of TiO2 Films for Degradation of Dyes in Distilled and Tap Water

This study describes the impact of surfactant molecular weights (PEG 2000 and PEG 4000) on the photocatalytic activity of TiO2 films, deposited via dip-coating from a PEG-stabilized suspension and silver-functionalized photo-fixation of Ag+ under UV illumination. The photocatalytic activity of pure and Ag/TiO2 films is assessed in the aqueous-phase degradation of Malachite green and Methylene blue in distilled and tap water under UV and visible illumination. The results indicate a positive effect of both the higher-molecular-weight non-ionic surfactant and Ag-functionalization yield higher photocatalytic efficiency. Notably, films photo-fixed with 10−2 M Ag+ show the highest degradation percentages in all experimental conditions. A direct correlation between the concentration of Ag+ ions and the enhancement of the photocatalytic activity is revealed: pure TiO2 < Ag, 10−4/TiO2 < Ag, 10−3/TiO2 < Ag, 10−2/TiO2. Flame atomic absorption spectrometry is used to study the Ag+ leeching from the Ag/TiO2 films. The structural properties of the nanostructures are investigated through scanning electron microscopy, Brunauer–Emmett–Teller analysis, energy-dispersive X-ray spectroscopy, and X-ray diffraction. Additionally, after three cycles of operation, Ag, 10−2/TiO2 (PEG 4000) films can maintain their photocatalytic activity, suggesting a potential application in the treatment of dye wastewater.