Answers are grounded in this paper and cite their sources.
Abstract The primary aim of this study was to synthesize catalysts suitable for both the anode and cathode of sorbitol fuel cells. The catalysts investigated in this research included Ag/C, AgMnO₂/C, and Pd/C. To begin the investigation, the physical properties of these catalysts were examined using SEM, EDS, and XRD techniques. The catalysts were found to have small, densely packed and lumpy particles, according to the results. The next phase of the study involved the use of cyclic voltammetry to evaluate the electrochemical properties of sorbitol oxidation in alkaline fuel cells. The Pd/C catalyst showed a maximum current density of 0.54 mA.cm⁻ ² at a sorbitol concentration of 0.1 M. In the reduction procedure, the Ag/C and AgMnO₂/C catalysts were similarly evaluated using identical sorbitol solution concentration ratios in a 0.1 M alkaline KOH solution. Notably, the reduction reaction was hampered when the catalysts were diluted with sorbitol solution due to their oxidation resistance. In the evaluation of catalyst performance, it was found that the electrocatalysts with the Pd/C anode and AgMnO₂/C cathode exhibited a higher power density than those with the Pd/C anode and Ag/C cathode. The AgMnO₂/C catalyst was effective in facilitating the oxygen reduction reaction (ORR) and enhancing alkaline electrolyte solutions.
No takes yet. Share an insight, caveat, or question.
Chaiburi et al. (2024) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: