Hydropower generation from ultra-low-head water resources is the salient category. The power can be tapped through different non-conventional turbines and is developing these days with different features. This research aims to develop a technology that applies to ultra-low-head resources from conceptualization to laboratory testing. Among several ultra-low-head water resources, it is concentrated on the power generation from the head drop section of the open canal flow through a new hydro turbine. A vertical shaft turbine with an axial flow type of runner having fixed, flat, and constant blade thickness including fixed guide vanes has been designed conventionally for 0.5 m of head and 0.088 m3/s of discharge. Several experiments have been conducted with fixing the level of flow outlet control from 0.0 m to 0.5 m creating the runner from free to submerged conditions is the novelty of this research. The results obtained for all the independent and dependent variables are presented and discussed for a constant flow of 0.088 m3/s and constant speed of 115 rpm conditions. The uncertainty on measurement was found ±1.85% and the overall maximum efficiency obtained was 53.8% for flow 10% above the design flow. The research has concluded the use of outlet flow control is necessary to achieve the maximum efficiency of the turbine at a specific height and the overall efficiency can be advanced further through the optimization of blade profile.
No takes yet. Share an insight, caveat, or question.
Chaulagain et al. (2024) studied this question.