Key points are not available for this paper at this time.
Abstract Nowadays, reducing construction waste has grabbed the attention. As bricks and ceramic tiles represent more than 50% of the ceramic waste in many European countries. Thus, the recycling of this waste type is one of the most significant challenges within the paradigm of the circular economy. This paper investigated the impact of substitution levels of cement by waste ceramic powder (WCP) and waste brick powder (WBP) at 0%, 5%, 10% and 15%, on the HSC characteristics. The WBP and WCP materials were characterized in detail by laser granulometry, XRF and XRD measurements, followed by standard mixing, production, and curing of concrete samples. The experiments on dry density, modulus of elasticity, flexural strength, splitting tensile strength, compressive strength, resistance to sulfate attack, water absorption and ultrasonic pulse velocity were conducted to evaluate the hardened properties of concrete. It was demonstrated that the durability and strength of concrete containing WBP and WCP as partial replacements for cement are marginally inferior to those of the control sample. On the other hand, samples containing WBP had a lesser negative effect on HSC properties in comparison with samples containing WCP. However, employing a 5% WBP with 10% WCP mixture enhanced the characteristics of the HSC in comparison to samples containing various percentages of WCP individually. In addition, the microstructure analyses revealed that the addition of 10% WCP and 5%WBP to HSC specimens resulted in higher hydration products and a slightly denser concrete matrix compared to samples containing various percentages of WCP individually. Research findings indicate that a 15% substitution of cement with WCP or WBP illustrated an environmental benefit in concrete production due to a 13.1% reduction in specific energy consumption.
Tawfik et al. (Mon,) studied this question.