Influence of graphene oxide properties, superplasticiser type, and dispersion technique on mechanical performance of graphene oxide-added concrete

The incorporation of Graphene Oxide (GO) nanomaterial into concrete has gained significant attention due to its potential to enhance mechanical and durability properties. The addition of GO to concrete creates considerable changes in the morphology of the concrete matrix, creating a densified microstructure. Critical parameters significantly affect these microstructural enhancements and, consequently, the final performance in GO-added concrete. These parameters include GO material properties, superplasticiser (PS) type, and dispersion techniques. Therefore, this study investigates the influence of GO on the mechanical performance of concrete, focusing on these critical factors. Unlike existing studies concentrating on a single parameter's effect, this research comprehensively compares how these parameters impact GO-added concrete. Two commercially available GO types (GO-A and GO-B) and two PS types (PS-A and PS-B) are utilised. At the same time, three commonly used mixing techniques, such as mechanical, high-speed, and ultrasonic mixing techniques, are considered for GO dispersion. GO-A is added to concrete in percentages ranging from 0.02 % to 0.14 % by weight of cement (bwoc), while GO-B ranges from 0.04 % to 0.20 % bwoc. Based on compressive strength test results, the optimum GO dosages are 0.08 % for GO-A and 0.12 % for GO-B. The highest strength results are achieved for GO-B added concrete with PS-A addition and following the ultrasonic dispersion method, highlighting these parameters as optimal for maximising GO-added concrete performance. The optimum concrete mix exhibits 33 %, 24 %, 25 %, and 30 % increments for compressive strength, indirect tensile strength, flexural strength, and elastic modulus properties at 28 days. This paper provides a deep theoretical explanation of the effects of GO material properties, dispersion techniques, and PS type on GO-added concrete performance. The findings provide valuable insights into selecting suitable parameters for optimising the mechanical properties of GO-added concrete, contributing to the advancement and effectiveness of construction materials.