Numerical investigation of the thermal-hydraulic performance of a novel parabolic trough wavy tubular receiver by using FMWNCT/oil-nanofluid coupled with fins

This study employs a computational fluid dynamics (CFD) approach to assess the performance of a novel wavy profile tube receiver. It integrates rectangular fins and an Oil-based nanofluid, specifically utilizing Thermodyne GG-03 synthetic oil combined with Functionalized Multi-Wall Carbon Tubes (FMWNCT). The synthesis involves rigorous experimental procedures to characterize the thermophysical properties of the oil and nanofluid. Empirical correlations, validated against Bitam et al.'s model [1], guide the numerical analysis. The investigation, utilizing a steady-state κ - ω SST turbulence model with a non-uniform Gaussian thermal flux distribution, explores thermohydraulic performance in fully developed turbulent flow (Reynolds number range: 2x104 – 5x104). Comparative analysis with Bitam et al.'s work, employing Syltherm 800 oil as a reference, reveals a 25.76% average Nusselt number enhancement with Thermodyne GG-03. Additional improvements are observed: 124.69% with FMWNCT/oil-nanofluid, 137.04% with fins, and 236.54% with combined FMWNCT/oil-nanofluid and fins. These enhancements lead to increased heat transfer coefficients and rates. The friction coefficient rises by less than 60%, mainly attributed to the Nusselt number improvement. At RE = 20000, the Maximum Performance Evaluation Criteria (PEC) is 5.5, signifying significant improvement. Notably, a 300% PEC enhancement is observed compared to Roger and Mayhew's curved tube model [1]. In conclusion, these findings offer valuable insights for efficiently designing wavy tubular receivers in PTR collectors.