Answers are grounded in this paper and cite their sources.
Experimental evaluation demonstrates reduced gray scale distortion in electrowetting displays, highlighting enhanced luminance consistency across driving stages.
Due to the hysteresis characteristics of electrowetting display, the luminance of the same driving voltage is different in the voltage rising stage and the voltage falling stage. In this paper, a gray distortion correction method for hysteresis characteristics of electrowetting display is proposed. Firstly, by measuring the influence of hysteresis characteristics on the photoelectric curve under different voltage ranges, the hysteresis curve model of electrowetting display was established by fitting the measured data. Based on this, the driving voltage mapping relationship of the same gray scale in different scenes is constructed, and finally the effect of reducing the luminance difference is achieved to reduce the gray distortion. Experimental results show that the proposed scheme can effectively reduce the degree of distortion, and the maximum gray‐scale relative luminance difference is reduced from 20.07% to 0.01%, and the reduction ratio is 99.93%. The relative luminance difference was reduced by 10.84% on average, and the reduction ratio was 80.98%. The oil aperture ratio distortion is reduced from 5.67% to 0.13%, and the reduction ratio is 97.7%.
No takes yet. Share an insight, caveat, or question.
Mei et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: