Answers are grounded in this paper and cite their sources.
In this paper, a novel lightweight and low-cost Al 35 Mg 20 Zn 15 Cu 10 Si 20 at. % (Al 26.17 Mg 13.47 Zn 27.18 Cu 17.61 Si 15.57 wt.%) has been successfully designed, produced, and characterized. The thermophysical parameters were used to understand the phases associated with this alloy that show a low density of 3.42 g/cm 3 . The designed alloy was manufactured using both the arc and the muffle furnace. The alloy was characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM) equipped with an energy dispersive spectrometer (EDS). The alloy is characterized by a multiphase microstructure with three major phases including Mg 2 Si intermetallic phase and eutectic. The volume fraction of the eutectic and the intermetallic phases are 37.83 and 34.99 respectively. The heat capacities of the alloy were also determined by means of differential scanning calorimetry (DSC). The alloy provides a high latent heat of up to 124 J/g, which is one of the highest among the high-temperature metallic materials. The present work provides valuable information for researchers wishing to design and manufacture industrial-grade high-entropy alloys (HEAs).
No takes yet. Share an insight, caveat, or question.
Nyaforkpa et al. (2024) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: