Key points are not available for this paper at this time.
Radiation detection is vital for naturally occurring radioactive material detection, port and border monitoring, and homeland security operations. SiPM-based single-volume scintillator detectors offer a cost-effective and robust solution that enables timely radioactive site surveys, while retaining accuracy and sensitivity sufficient for isotope identification. Enhanced site surveying can be achieved by optimising scintillator detector design. In this work, a detailed GAGG:Ce, CLLBC:Ce, BGO, NaI:Tl, and CsI:Tl SiPM-based scintillator detector simulation platform was developed with the Monte Carlo radiation transport toolkit, Geant4, and experimentally benchmarked. This simulation platform successfully predicted the spectral features for selected gamma ray emitting isotopes with energies between 30 keV to 2 MeV. The full width half maximum (FWHM) and normalised cross-correlation coefficient (NCCC) between simulated and experimental energy spectra were also compared. The majority of simulated FWHM values reproduced the experimental results within 2% and the NCCC values demonstrated agreement between the simulated and experimental energy spectra. Discrepancies in these figures of merit can be attributed to detector signal processing electronics modelling, geometry approximations, and multiple Compton scattering within the detector and surrounding environment.
Miller et al. (Tue,) studied this question.
Synapse has enriched 5 closely related papers on similar clinical questions. Consider them for comparative context: