This is the authors' abstract. We don't add key points for this paper.
A low-jitter multi-phase clock generator is pivotal in high-speed serial link transceivers. With data rates surpassing 100Gb/s, incorporating sub-rate operations becomes essential to overcome inherent bandwidth constraints. This, in turn, demands the generation of multiple sub-rate clock phases. However, the difficulty lies in producing these clock signals with minimal jitter, particularly at high frequencies (>10 GHz). Contemporary clock generators with integrated jitter below 100fsᵣₘₛ primarily utilize LC oscillators [1]. However, LC-based phase-locked loops (PLLs) occupy considerable space, lack efficiency in generating multiple phases, and are vulnerable to electromagnetic coupling in multi-lane SerDes systems. In contrast, ring-oscillator (RO) based architectures offer a compact footprint and inherent suitability for multi-phase clock generation. As a result, there is a growing need for resilient RO-based PLLs that can achieve jitter levels comparable to those of LC-based alternatives. However, the performance of these PLLs is hindered by excessive noise inherent to the RO, a challenge further exacerbated by the requirement to function within noisy supply environments and across a wide temperature range. Prior investigations [2–4] have recognized this limitation and focused on widening the RO phase noise suppression bandwidth. To illustrate, an injection-locked PLL was employed to extend the bandwidth to approximately one-sixth of the reference frequency (FREF) in [2]. These techniques, while effective, necessitate intricate frequency-tracking loops that prove challenging to implement while aiming for low jitter across a wide frequency range. An alternate approach detailed in [4] accomplished 135fs jitter but relied on an FREF of 1.85GHz, yielding a modest 7GHz output. Recent trends have seen sampling PLLs emerge, lessening the noise concerns inherent to traditional PLLs [1]. Nevertheless, achieving <100 fs jitter performance and >10 GHz output using an RO remains elusive. Given these limitations, this paper presents an 8-phase sampling PLL that operates from 6.8GHz to 14GHz (2 × higher output frequency compared to [4]) and achieves an integrated jitter of 69.3fs (one-third of the jitter reported in [2]), an in-band noise level of −131.4dBc, and a spur level below −54.4dBc under 50mV <inf xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">pp</inf> supply ripple.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Khalil et al. (2024) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: