Answers are grounded in this paper and cite their sources.
This paper covers the introduction of a new fit for purpose design consisting of a unitized wellhead (Unihead) that has been introduced to satisfy both drilling and well stimulation requirements while optimizing the capital cost, reducing the flat time, and enhancing both rig and rig-less operations. Cost management is paramount to ensure the success for all project specifically for unconventional wells. Optimizations in casing design, drilling fluids and completion have been implemented heavily and around the globe. However, wellhead design optimization remains to be an area of improvement. Prior to presented optimization, the existing wellhead system used in subject wells was originally designed for conventional wells. That system had two major drawbacks. First, it increased the rig flat time since it required waiting for cement to set before removing the Blow Out Preventer (BOP) to install the casing hanger. After that, the next wellhead spool is installed followed by installing the BOP. Second, the system used metal seals to isolate the annuli and also used a production tree to suspend the well after the drilling phase, which was costly. The new system consists of utilizing a Unihead body and mandrel hangers to suspend both the production and long string casings. The annuli between the Unihead and the casing hangers are sealed by a seal assembly (Packoff) utilizing elastomer seals. After completing the drilling phase, the system will also facilitate rig-less well stimulation operations. Furthermore, the system will enable the installation of downhole completion and a velocity string after well stimulation. Finally, the well will be produced through the velocity production tree. The new system was successfully installed with outstanding results and offered several advantages. This includes the time optimization, capital cost reduction and significantly reduced flat time. The system achieved these benefits through the proper system design that is fit for purpose for both rig and rig-less operations and eliminated the challenges usually encountered with conventional system design.
No takes yet. Share an insight, caveat, or question.
Alsaeed et al. (2024) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: