Answers are grounded in this paper and cite their sources.
Vacuum-free, solution-processable high-κ-oxide dielectrics are considered to be a key element for emerging low-cost flexible electronics. However, they usually suffer from low breakdown strength and frequency-dependent capacitance, which limit their broader applications. Here, we report a universal way to improve solution-based high-κ oxide dielectric properties (e.g., Al2O3, ZrO2, Ga2O3, Sc2O3, Ho2O3, and Sm2O3) by sulfate incorporation. In-depth characterization shows that sulfate incorporation could reduce hydrogen and oxygen vacancy-related defects in high-κ oxides, thereby improving the dielectric performance. The optimized S-doped high-κ oxides show smooth surface (rms < 0.20 nm), low leakage current (∼10-7 A/cm2@4 MV/cm), excellent dielectric breakdown strength (>10 MV/cm), and stable capacitance-frequency characteristics. Besides, oxide thin-film transistors based on these high-κ dielectrics exhibit excellent performance (e.g., mobility >20 cm2 V-1 s-1, on/off ratio of ∼107, threshold swing of ∼0.14 V dec-1, threshold voltage of ∼0 V, and hysteresis of ∼0.02 V). Thus, this work provides a general approach for the development of high-quality solution-based high-κ oxides for transistor circuitry.
No takes yet. Share an insight, caveat, or question.
Xu et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: