This is the authors' abstract. We don't add key points for this paper.
We developed a simple and environmentally friendly spin-coating method for high-κ dielectrics (AlOx, ZrOx, YOx and TiOx). These materials were used as gate dielectrics for solution-processed nanocrystalline In2O3 or amorphous InZnO TFTs with a maximum processing temperature of 300 °C. The role of high-κ dielectrics in device performance was systematically studied. Among the high-κ dielectrics, the AlOx-based devices showed the best performance with mobilities of 21.7 cm2 V−1 s−1 in an In2O3 TFT and 11.6 cm2 V−1 s−1 in an InZnO TFT with the on/off current ratio exceeding 106. Furthermore, the devices exhibited ultra-low operating voltages (<3 V) and negligible hysteresis. A comprehensive study suggests that the high performance of the AlOx-based devices could be attributed to the smooth dielectric/semiconductor interface and the low interface trap density besides its good insulating properties. Therefore, the solution-processed AlOx can be used as a promising high-κ dielectric for low cost, low voltage, high-performance oxide electronic devices.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Xu et al. (2014) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: