Answers are grounded in this paper and cite their sources.
Analysis reveals enhanced fluid dynamics and saturation evaluation in carbonate reservoirs, suggesting effective EOR strategies.
The main goal of this study is to confirm the efficiency of a pilot to improve recovery factor by switching from high salinity to low salinity flooding. The assessment of the pilot was carried out using a combination of Log- Flow-Log (LFL) technique and the Single Well Chemical Tracers Test (SWCTT). The acquired data required processing with high integration at every step of the year-long project with the aim to provide crucial information for full-field development decisions which involve significant capital spending. This paper shows the results of an 11-month LFL program with seven consecutive logging and three SWCTT campaigns carried out in a high-salinity carbonate reservoir in the Middle East. The logging programs were carefully designed to match project requirements, with tools chosen for their accuracy, investigation depth, and vertical resolution. After the initial baseline logs, repeated surveys were conducted under various injection and production scenarios, including production of in-situ fluids, injection of waters with different salinity (from very fresh to very saline). Wireline logging measurements were carried out using a mix of surveillance technologies, including production and injection logs, high-resolution noise and temperature surveys, and pulsed neutron logs to overcome challenges of fluid saturation and water movement detection. The logging program was coordinated with SWCTT test steps to ensure comprehensive data capture and analysis. Combined, the surveys allowed for a thorough evaluation of fluid saturations during primary production and residual oil saturations during injection, as well as an understanding of flow dynamics around the wellbore, including production and injection profiles and detection of water channeling behind casing. The clear understanding of fluid movement gives an opportunity to run numerical simulation of single well chemical tracer movement and estimate oil recovery changes in near well bore area. The results of integrated analysis in a pilot well allowed us to scale up the previous laboratory core measurements and recognize challenges for future full field implementation as an EOR project. Saturation evaluation required the combination of measurements from both salinity-dependent Sigma and salinity- independent C/O logging depending on the fluid properties in place for each phase of the LFL operations - saline or freshwater injection or production. The unique approach of carrying out logs under dynamic conditions gave deeper insights into reservoir behavior that were not fully possible with traditional methods. In addition, advanced processing techniques were developed for innovative noise logging tools with wide band of frequency, distinguishing formation and wellbore flow signals from background noise.
No takes yet. Share an insight, caveat, or question.
Tveritnev et al. (2025) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: