Answers are grounded in this paper and cite their sources.
This analysis reveals improved fuel efficiency and engine performance for ships, indicating potential operational insights.
To address GHG reduction goals, this study develops an integral 1D model combining engine, propeller, and hull resistance to optimize fuel efficiency through operational management. Validated against onboard measurements, the model demonstrated its capability to accurately predict the main engine's performance without requiring detailed combustion data. It examines engine response under fuel rack limiter constraints and identifies optimal engine speeds for varying sea conditions. A case study on a Panamax bulk carrier demonstrated that, operational optimization using this model can significantly contribute to improving fuel efficiency. The model enables practical, real-time simulation and offers insights for enhancing propulsion performance under real-sea environments. INTRODUCTION In pursuit of the International Maritime Organization's (IMO) goal of achieving net-zero greenhouse gas (GHG) emissions by 2050 [1], various initiatives such as the adoption of alternative fuels such as ammonia and hydrogen fuels, the implementation of wind propulsion systems, and the development of onboard carbon capture and storage (OCCS) technologies have been actively pursued. However, each of these emerging technologies presents its own unique set of challenges. Moreover, as the application of these technologies requires substantial capital investments, it is important to simultaneously explore operational improvement methods as well. In addition, in recent years, with the implementation of performance evaluation schemes such as the Carbon Intensity Indicator (CII), slow steaming has become increasingly common, driven by the "cubic rule" for ship fuel consumption that fuel consumption increases drastically with ship speed, specifically, it is approximately proportional to the ship speed cubed. This trend raises the possibility of installing lower output engines for future vessels. However, given the limitations on engine output, particularly in adverse weather conditions, this approach will present challenges to engine operation. In this aspect, IMO has already established minimum propulsion power requirement. However, Takagi et al. have pointed out that beside the compliance with the IMO requirements, careful attention should be paid in determining the main engine power to minimize any potential risks associated with the propulsion power limit [2].
No takes yet. Share an insight, caveat, or question.
Wako et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: