Answers are grounded in this paper and cite their sources.
Laboratory testing demonstrates the novel remediation system restores production in heavy crude oil wells, indicating significant advances in removal of production impediments.
Inadequate removal of the polymeric filter cake before production of heavy oil wells has been a challenge for optimal production of mature, low pressure, and low temperature fields located in Northern South America. The fields were drilled with water-based systems, but the fluid was not optimized for production enhancement. Problems like scale formation and emulsion tendencies generated production impediment at the surface of the slotted liners, screens, and near-wellbore region, thus creating impermeable barriers for traditional treatments. A novel fluid system was developed to restore permeability of the near-wellbore and flow through the completion tools. Rigorous laboratory protocols were developed and followed to simulate the damage inside the well (blockage and formation damage mechanisms) and to determine the effectiveness of the treatment at bottom hole conditions. Important aspects of the fluid and its applications in the field were considered during development and testing, including but not limited to thermal stability, fluid compatibility, damage removal capacity, acid handling limitations, preservation of original wettability, return permeability, and minimal surface equipment for fluid application. The novel fluid system was successfully developed. It is based on mixtures of chelating agents, surfactants, co-surfactants, scale inhibitors, fine migration and clay control agents, and corrosion inhibitors. The complex mixture is capable to remove the damage in a wide range of conditions, including low and high pressure at low or high temperatures. Laboratory results showed high effectiveness of the system removing formation damage tool blockage. The fluid achieved sludge removal values higher than 90% with interfacial tensions lower than 1 mN/m and return permeabilities higher than 90% while preserving the formation wettability as water wet. The novel system is completely compatible with the native fluids (heavy crude oil of 10-14ºAPI) and reservoir rock. The treatment is capable of removing the heavy crude oil layer from organic and inorganic deposits while digesting carbonates and scales formed and polymers from the filter cake. The fluid presents a low HSE risk for all the field personnel and low application risk using existing assembly or completion tools. It is also compatible with all existing tools and tubulars in the well, contrary to traditional fluid treatments. Field testing over an underperforming well showed promising results while implemented using bullheading techniques. The permeability restoration fluid system is a novel and highly effective technology to remove production impediments from slotted liners, screens, and the near-wellbore. The unique mixture of products creates a fluid capable of cleaning heavy crude oil wells at low pressure and temperature while overcoming the limitations of traditional treatments. The novel fluid helps with production reactivation and restoration of mature fields.
No takes yet. Share an insight, caveat, or question.
Toro et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: