Answers are grounded in this paper and cite their sources.
Needle peening enhances fatigue limit in welded joints, suggesting improved industrial reliability of high-strength steel.
In this study, we investigated the application of needle peening to HT780 welded joints with electrical discharge machining defects at the weld toe to identify the fatigue limit improvement and the defect size that can be rendered nondamaging. The main findings of this study are as follows: Four types of specimens were subjected to three-point bending fatigue tests. Needle peening increased the fatigue limit of all specimens. For specimens with weld cracks treated by needle peening and crack depths of less than 1 mm, the fatigue limit was equivalent to that of specimens treated by needle peening.The maximum crack depth that can be rendered nondamaging by needle peening was 1 mm; however, evaluation by surface crack nondamaging technology indicated a crack depth of 1.31 mm. The introduction of deep compressive residual stress through needle peening was the primary factor contributing to the increased fatigue limit and allowable defect size. These results demonstrate that needle peening can significantly enhance the reliability of high-strength steel welded joints, thereby addressing the issues of welded joints that limit the industrial application of high-strength steel.
No takes yet. Share an insight, caveat, or question.
Dae-Hoon Shin (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: