Synapse
⌘+K
Synapse
PulseExploreClubsResearchersJournals
Instagram
HomeClubsExplore
November 21, 2025Scientific ReportsOpen Access

Model testing and response surface investigation of eccentric loading on closely spaced strip footings

View Full Paper
Ask AI
Bookmark
Share

Authors

BMBadis MazouzABAhmed Abderraouf BelkadiMBMudthir Bakri

Discussion

Loading...

Member takes

Overview

Laboratory analysis demonstrates decreased bearing capacity with eccentric loading in strip footings, indicating design considerations are crucial.

Key Points

  • Bearing capacity decreases with increased load eccentricity, affecting performance.
  • Influence of spacing ratio (S/B) and load eccentricity (e/B) identified through response surface methodology.
  • Laboratory tests revealed maximum interference at a spacing ratio S/B of 0.5.
  • Quadratic model validated with low error metrics: RMSE of 0.063 and MAE of 0.0231.

Cite This Study

Mazouz et al. (2025) studied this question.

synapsesocial.com/papers/6924e3ecc0ce034ddc34eeb4https://doi.org/10.1038/s41598-025-25348-y
View Full Paper
Ask AI
Bookmark
Share

Also Consider

Synapse has enriched 5 closely related papers on similar clinical questions. Consider them for comparative context:

  1. 1Numerical assessment of failure load and soil–footing contact stress distribution for concrete foundations on cohesionless soil2026
  2. 2Modelled Base Roughness Effects on the Bearing Capacity and Settlement of Strip Footings2026
  3. 3Physical model study on failure mechanism of strip footing on reinforced granular deposit2024 · 6 citations
  4. 4Settlement analysis of isolated footings using two soil models2026
  5. 5Optimal Design of Ring Footing on Reinforced Sandy Soil under Eccentric-Inclined Loads2026 · 1 citations