Answers are grounded in this paper and cite their sources.
This analysis demonstrates temperature history prediction in stainless steel PBF-LB/M, suggesting the model enhances laser scanning efficiency.
Among various additive manufacturing methods, powder bed fusion-laser beam/metal (PBF-LB/M) stands out for its rapid prototyping and design flexibility. However, temperature-related defects often limit its material suitability, and capturing temperature evolution during fabrication remains challenging. This study presents a 3D multi-scale finite element (FEM)-based model to predict locally-resolved time-temperature profiles in PBF-LB/M. The model integrates a macroscopic part-scale simulation with a meso-scale simulation by transferring temperature field data between them. DIN EN 1.4404 stainless steel is used, incorporating experimentally measured material and process parameters. The part-scale model employs a lumped-layer approach to enhance simulation speed at the expense of accuracy, while the meso-scale model focuses on detailed laser scanning and powder-solid transitions, demanding higher computational resources. Despite differing accuracy levels, both models yield consistent results in low-temperature regions, particularly at the end of each thermal cycle. Overall, the proposed multi-scale model effectively predicts the thermal history of the PBF-LB/M process, achieving a practical compromise between accuracy and computational efficiency.
No takes yet. Share an insight, caveat, or question.
Ye et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: