Answers are grounded in this paper and cite their sources.
Studying the physical characteristics of the melt region in polymer-based laser powder bed fusion (PBF-LB/P) offers good comprehension that is essential for quality control, process optimization, understanding of material behavior, and preserving process consistency. Among the few numerical modelling investigations of PBF-LB/P, this study focuses on 3D multiphysics simulation of melt pool morphologies, beginning with powder bed preparation incorporating the actual particle size distribution using the discrete element method (DEM). A thermal fluid dynamic numerical model is then developed based on the finite volume method (FVM) using Flow-3D Weld to simulate PBF-LB while using polyamide 11 (PA11) as the primary material. The cooling after sintering plays a crucial role for the formation of the melt region due to the high viscosity of the polymer material effectively resulting in creeping flow. Here, we propose a model for both sintering as well as the subsequent cooling step, a two-step model capable of simulating the finished structure accurately with relatively low computational resources. The model's accuracy is verified through a mesh dependency analysis and its predictive power via validation against internal single-track experiments providing dimension data on the melt region width and depth. The simulation results allow for a detailed exploration of the effects of laser settings on melt region morphologies and the occurrence of defects. The model's scope is further extended to multi-track simulation, revealing the connection between surface roughness and laser settings. In general, this study provides significant contributions to the comprehension of PBF-LB/P methodologies which in turn can be used for further process improvement.
No takes yet. Share an insight, caveat, or question.
Yeh et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: