Answers are grounded in this paper and cite their sources.
Implementation of a low-noise amplifier shows 4.4 dB noise figure and 20.5 dB gain, indicating effective broadband performance.
This paper presents a W‐band broadband low‐noise amplifier (LNA) implemented in a 100‐nm GaAs process. A key innovation of the design is the co‐optimization of gain peaking and staged source degeneration, which together enable flat gain and broadband noise performance. The work begins with an analysis of pseudomorphic high‐electron‐mobility transistor noise behavior, identifying the optimal noise current density as a critical design parameter. By selecting appropriate device dimensions and biasing the transistor at this current density, the noise is minimized theoretically. A four‐stage cascaded topology is adopted, in which each stage applies tailored source degeneration feedback and interstage microstrip lines are optimized for broadband matching. Measurement results demonstrate a minimum noise figure of 4.4 dB across 75–90 GHz, with 17.5–20.5 dB gain, 3 dB gain flatness, input and output return losses below 5.9 and 6 dB, respectively, and isolation better than 38 dB, achieving state‐of‐the‐art performance in the W‐band.
No takes yet. Share an insight, caveat, or question.
Zheng et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: