Answers are grounded in this paper and cite their sources.
Finite element models show improved structural stability in lumbar fusion cages, suggesting oblique fixation may enhance biomechanical performance.
Objective: Lumbar interbody fusion (LIF) is widely used to treat degenerative spinal disorders; however, both fixation strategies and interbody Cage designs still present biomechanical limitations. This study aimed to develop a posterior lumbar interbody fusion Cage using topology optimization and to compare the biomechanical performance of oblique pedicle screw fixation with conventional fixation. Methods: A validated three-dimensional nonlinear finite element model of the L1–L5 lumbar spine was established based on CT data. A two-step weighted topology optimization was applied to the L3–L4 interbody Cage to determine both the external contour and the internal bone graft window. Finite element models with oblique pedicle screw fixation and conventional pedicle screw–rod fixation were constructed and evaluated under static physiological loads and whole-body vibration conditions. Results: Compared with the conventional Cage, the topology-optimized Cage combined with oblique fixation significantly reduced the maximum von Mises stress on adjacent endplates and decreased Cage displacement under both static and dynamic loading. Although stresses in the Cage and screws increased relative to traditional fixation, all values remained well below material yield limits. Conclusions: The combination of a topology-optimized Cage and oblique pedicle screw fixation improves load transfer and structural stability while reducing the risk of endplate damage and Cage subsidence. This approach provides a promising alternative design strategy for posterior lumbar interbody fusion.
No takes yet. Share an insight, caveat, or question.
He et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: