Answers are grounded in this paper and cite their sources.
Develops a highly conductive interlayer for enhanced performance in solid oxide fuel cells, indicating potential for improved energy systems.
Development of a highly conductive interlayer with good multilayer interfacial compatibility is critical for achieving high-performance inert ceramic-supported flat-tubular segmented-in-series solid oxide fuel cells (FT-SIS-SOFCs). In this study, a high-performance MgO-MgAl₂O₄ (MMA)-supported solid oxide fuel cell is prepared by developing an innovative 70 vol % NiO-30 vol % MgAl₂O₄ interlayer via a cosintering process. The NiO-MgAl₂O₄ interlayer effectively suppresses MgO diffusion from the MMA substrate, limiting the diffusion distance to 25 μm. Additionally, the conductivity of the fabricated interlayer exceeds 3400 S cm⁻¹ at the operational temperature. It exhibits excellent cosintering compatibility with the other functional layers. When the thickness of the NiO-MgAl₂O₄ interlayer is approximately 40 μm, the MMA-supported SOFC single cell shows an open circuit voltage (OCV) of about 1.07 V and a power density of 760 mW cm⁻² at 850 °C, as well as excellent long-term stability. Moreover, the 16-cell FT-SIS-SOFCs show an OCV and maximum output power at 850 °C of 17 V and 15 W, respectively.
No takes yet. Share an insight, caveat, or question.
Li et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: