This is the authors' abstract. We don't add key points for this paper.
A gadolinium-doped ceria (GDC)/scandia-stabilized zirconia (ScSZ) bilayer electrolyte on a microtubular (LSM) support was prepared via extrusion of a microtubular cathode support and subsequent surface coatings with electrolyte and anode slurries. The GDC/ScSZ bilayer electrolyte was obtained on the LSM support using a cosintering technique, and the LSM-supported microtubular solid oxide fuel cells (SOFCs) were evaluated using field-emission scanning electron microscopy, X-ray diffraction, and electrochemical measurements in wet hydrogen (3% ) atmosphere. An LSM–GDC activation layer was also introduced between the cathode tube and the electrolyte layers for improvement of cell performance. The micro-SOFC exhibited a stable open-circuit voltage above 1.03 V in the temperature range from 450 to , and the cell generated a maximum power density of 15, 73, 230, and at 500, 600, 700, and , respectively. This result indicates that our developed cosintering fabrication technology can realize a stable and high-performance, LSM-supported micro-SOFC.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Yamaguchi et al. (2008) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: